- код:
MG10M
Wedges for Minigraf 10 mm, very hard wood - 2400
- вес нетто: kg 1,01 - вес брутто: kg 1,01
Wedges for Minigraf 10 mm, very hard wood - 2400
Wedges produced by Alfamacchine suitable for all Minigraf underpinners.
The special design and the quality of the steel give the wedges an effect (Power Twist) which pushes the two sides of the frame towards the centre, thus obtaining a perfect joint.
The type of silicone with which the wedges are lubricated also allows for better penetration into the wood.
The distance between the two ends of the wedges is 11 mm
The wedges are packaged in sticks of about 200 pieces.
There are 3 series of wedges: for soft woods, for hard woods, for very hard woods.
These are wedges for very hard woods
Available in the following heights:
MG7M = 7mm high - approx 3200 wedges per box
MG10M = 10mm high - approx 2400 wedges per box
MG12M = 12mm high - approx 2400 wedges per box
MG15M = 15mm high - approx 1600 wedges per box
Test boxes (code MGM66) are also available which contain a bar of wedges (about 200 wedges) for each height for a total of 800 wedges.